Linear Stroke Lengths

 3 , 6 & 9 mm (std. versions);

 1.5 mm (high res. version)

Nonlinearity (typical)

 +/- 1% over full linear stroke length (using best fit strain line method)

 +/- .3% over 50% of linear stroke length

Sensitivity

 2 volts/mm typical

Signal to noise

 2000 to 1 (with filter 3 dB down at 1 Khz, std.);

 600 to 1 (unfiltered)

Resolution

 1.5 microns (standard);

 .060 microns (high res.)

Frequency response

 7 Khz (unfiltered)

Temp. coeff. offset

 .0029% / degree C

Temp. coeff. span

 .030% / degree C

Hysteresis

 +/- 1 micron

Repeatability

 +/- 1 micron

Overall length

2.7 times linear stroke

Gauge length

adjustable, 1.5 mm min.

Outside diameter

1.5 mm (std. version)

1.8 mm (high res)

Casing material

Stainless steel (304 series) smooth shell std., threaded 4-40, 10-32, & pressure equalized versions available in 400 series stainless

Attachment method

Stainless screws, barbs

Spring tip

optional

Leadouts

45 cm (18"), multistranded, shielded, SS reinforced, teflon insulated

Connector

keyed Lemo 4-pin, polyolefin relief

Operating Temperature

-55 to 105 degrees C (standard)

-55 to 200 degrees C (optional)

Core weight

25 milligrams

Core material

.020" diameter superelastic NiTi alloy,

00-90 threaded end optional